Let a Master Sharpener Guide You

Servicing Your Scissors

 

Sensei Precision Edge Sharpening

THE SCISSOR SERVICE PROCEDURE

The scissor service procedure is designed to ensure that every scissor leaving the Precision Edge workshop complies with its original functional and aesthetic specifications. Each moving part is completely overhauled and each scissor is meticulously refinished to restore its lustre. Cutting edges are rigorously tested to guarantee the level of quality and reliability you naturally expect from your scissors.

BOOK MY SERVICE

Step 1

DISASSEMBLY

The scissor is completely dismantled, the tensioning system is appraised for wear and tear, and all moving parts are carefully inspected for damage prior to being cleaned.

Step 2

CLEANING

After the scissor is dismantled, each component is cleaned with specially formulated solutions designed to bring out the natural luster of the metal and highlight any defects.

Step 3

VISUALLY INSPECT FOR ANY DAMAGE

After cleaning there is a further visual inspection for any damage to the scissor, blades, handle & tensioning system.

Step 4

REPLACEMENT OF COMPONENTS

A master sharpener closely examines each individual component of the scissor and identifies which components require replacement. Only genuine replacement parts supplied directly by the manufacturer are used to ensure longevity of each replaced part.

Step 5

SHARPENING

Our master sharpeners will check the edge of your scissor to ensure the correct type of sharpening takes place for the convex or bevelled edge of your blade. Using state of the art factory equipment, our master sharpeners will ensure that your blades are returned to you with precision sharpness and free from nicks.

 

Step 6

POLISHING

The polishing service allows your scissors to regain their original shine and brilliance. The blades are polished to restore the smoothness and ease of the cut. As with the sharpening service, our experienced and highly trained master sharpeners will safeguard against excessively polishing your blades to make sure the longevity of your scissor is maintained. Superficial scratches are removed.

Step 7

LUBRICATION AND REASSEMBLY

The same keen attention to detail that is devoted to cleaning, sharpening and polishing your scissor also goes into reassembling your scissor. After initial cleaning and sharpening, the pivot area, tension system and all moving parts are closely examined and any worn or damaged components replaced with genuine manufacturer's parts. Using the most advanced lubricants, each functional component of the movement is carefully lubricated to minimize friction and prevent wear. This ensures that the movement of your scissors will continue to perform accurately.

Step 8

TEST CUT

Quality control specialists make specific cuts using specialized materials designed to reveal any imperfection in the blade alignment and finish. Finally, a real world test cut is carried out on human hair to ensure factory like sharpness has been achieved on every scissor before they are given a final cleaning.

Step 9

FINAL QUALITY CONTROL

Rigorous quality checks are carried out at each stage of the servicing process. During the final check, all moving parts of your scissor are verified one last time against manufacturing specifications to guarantee the highest possible standard of quality.

 

Step 10

SERVICE GUARANTEE

After a complete service, your Scissor is covered by our Precision Edge Guarantee. We are committed to providing you with a sharpening service that will exceed your expectations. If you are not completely satisfied with your scissor please contact the service centre immediately so we can make sure your satisfaction is 100% guaranteed.

 

CHOOSE YOUR SERVICE PLAN

Chose the service plan that suits you
Choose from our Silver, Gold & Platinum Packages